Each pair of footwear is prepared especially for you according to individual design.
ATTENTION! Please refer to the Size Chart. Instructions below.
Hi Top Sneakers
|Foot length (cm)||23||23,5||24||24,5||25||26||27||27,5||28||28,3||28,5|
|Foot length (inch)||9,1||9,3||9,4||9,6||9,8||10,2||10,6||10,8||11,0||11,1||11,2|
Check what size of foot you have.
The easiest way to choose the right size is to measure your foot. You will need a sheet of paper for this, something to write and measure.
- Put your bare foot on a piece of paper and stroke it around. It is important that the writing tool is held vertically, i.e. at an angle of 90 ° from the surface.
- Mark the most prominent point of the foot in the front and heel. Measure these sections in a straight line.
- Compare with the size table.
Interior and insert: material
Total height of the shoe: 17 cm
Shoelaces: white material
Sole: white rubber (red and black bar)
Sole thickness: 2,5 cm
Footwear is printed using safe water-based paints. Shoes in colors other than white, require a special impregnation during production. The impregnant ensures longer life of footwear. Depending on the selected design and the color of the footwear, it may happen that freshly printed shoes have traces of impregnation. In this case, clean the footwear with a sponge dampened with water and soap. The shoe printing technology does not allow 100% equal coverage of the surface of the shoe. A small, fuzzy print may appear on the footwear. We ensure, however, that we put the utmost diligence and lots of passion for each pair of shoes, because we care about your satisfaction with the purchase.
Important! Every pair of shoes is made with great attention to every detail. In the case of printing on the entire surface of the shoe, however, there is the risk of incomplete printing of the place at the heel (see picture below). At the same time, we ensure that the process of preparing shoes for printing takes place in a way that minimizes the risk of occurrence of the aforementioned phenomenon.
Time of realization: 99% of our orders for footwear are made within 3-5 business days. Each pair of footwear requires the involvement and work of many people. Therefore, in periods of increased production load, the deadline may be extended to 10 business days.
Remember: personalized products are not refundable. Please, consider shopping carefully 🙂
If you need help contact us on: email@example.com